TANDEM AXLE STEP FRAME ON MECHANICAL SUSPENSION

SPECIFICATION

  • Gross Design weight 26000kg (28000kg Max)
  • Axle capacity 9000kg (10000kg Max)
  • Kingpin loading 16000kg
  • 12.2m long
  • 10mm rubbing plate at 1245mm height with 2040mm swing clearance
  • Single 50mm bolt-on kingpin
  • 127mm diameter Granning axles at 1360mm axle spread
  • Granning mechanical suspension
  • 235/75 x 17.5 twin tyres
  • Haldex EBS brakes with double diaphragm cylinders, automatic slack adjusters, park/shunt valve and standard “C” type couplings
  • Machinery carrier type sloped neck.
  • Heavy duty 2-speed landing legs
  • Neck and floor covered with softwood
  • 700mm wide by 1.7m long ladder style, spring assisted ramps with 17 degree loading angle and prop stand under beavertail
  • Side impact protection, lockable toolbox, rope hooks & spray suppression etc.
  • 24 Volt ISO standard electrical system wired via two 7-pin sockets.

TRIDEM AXLE STEP FRAME ON MECHANICAL SUSPENSION

SPECIFICATION

  • Gross Design weight 40000kg (50000kg Max)
  • Axle capacity 8000kg (10000kg Max)
  • Kingpin loading 16000kg (20000kg Max)
  • 13.6m long
  • 10mm rubbing plate at 1245mm height with 2040mm swing clearance
  • Single 50mm bolt-on kingpin
  • 127mm diameter Granning axles at 1360mm axle spread including 1 Granning steering axle
  • Granning mechanical suspension
  • 215/75 x 17.5 twin tyres
  • Haldex EBS brakes with double diaphragm cylinders, automatic slack adjusters, park/shunt valve and standard “C” type couplings
  • Machinery carrier type sloped neck.
  • Heavy duty 2-speed landing legs
  • Neck and floor covered with softwood
  • 700mm wide by 1.7m long ladder style, spring assisted ramps with 17 degree loading angle and prop stand under beavertail
  • Side impact protection, lockable toolbox, rope hooks & spray suppression etc.
  • 24 Volt ISO standard electrical system wired via two 7-pin sockets.

 

TANDEM AXLE STEP FRAME ON AIR SUSPENSION

SPECIFICATION

  • Gross Design weight 28000kg
  • Axle capacity 9000kg
  • Kingpin loading 14000kg
  • 12.2m Overall length with 1520mm beavertail at 11 degrees
  • 430mm high headboard with 45 degree corners
  • 10mm rubbing plate at 1245mm height with 2040mm swing clearance
  • Single 50mm bolt-on kingpin
  • 127mm diameter Granning axles at 1360mm axle spread
  • Granning air suspension complete with raise/lower valve
  • 235/75 x 17.5 twin tyres
  • Haldex EBS brakes with double diaphragm cylinders, automatic slack adjusters, park/shunt valve and standard “C” type couplings
  • Machinery carrier type sloped neck c/w neck ramps
  • Heavy duty 2-speed landing legs
  • Neck and floor covered with softwood
  • 700mm wide by 1.7m long ladder style, spring assisted ramps with 17 degree loading angle and prop stand under beavertail
  • Side impact protection, 600mm lockable stainless steel toolbox, rope hooks & spray suppression etc.
  • 24 Volt ISO standard electrical system , with 24N + 24S sockets
  • Painted NC red, Blue, Green, Yellow or Black

TRIDEM AXLE STEP FRAME ON AIR SUSPENSION

SPECIFICATION

  • Gross Design weight 38000kg (44000kg Max)
  • Axle capacity 8000kg (10000kg Max)
  • Kingpin loading 14000kg (14000kg Max)
  • 13.6m Overall length with 1520mm beavertail at 11 degrees
  • 430mm high headboard with 45 degree corners
  • 10mm rubbing plate at 1245mm height with 2040mm swing clearance
  • Single 50mm bolt-on kingpin
  • 127mm diameter Granning axles at 1360mm axle spread
  • Granning air suspension complete with raise/lower valve
  • 235/75 x 17.5 twin tyres
  • Haldex EBS brakes with double diaphragm cylinders, automatic slack adjusters, park/shunt valve and standard “C” type couplings
  • Machinery carrier type sloped neck c/w neck ramps
  • Heavy duty 2-speed landing legs
  • Neck and floor covered with softwood
  • 700mm wide by 1.7m long ladder style, spring assisted ramps with 17 degree loading angle and prop stand under beavertail
  • Side impact protection, 600mm lockable stainless steel toolbox, rope hooks & spray suppression etc.
  • 24 Volt ISO standard electrical system , with 24N + 24S sockets
  • Painted NC red, Blue, Green, Yellow or Black

Brochure:- Download & View PDF.